embedded usb_error ai_generated true

usb 1-1: device descriptor read/64, error -71

ID: embedded/usb-device-descriptor-read-error

Also available as: JSON · Markdown
78%Fix Rate
85%Confidence
3Evidence
2023-01-01First Seen

Version Compatibility

VersionStatusIntroducedDeprecatedNotes
any active — — —

Root Cause

Linux fails to enumerate USB device. Error -71 (EPROTO) = protocol failure during descriptor read. Hardware/signal issue.

generic

Workarounds

  1. 88% success Try a different USB port directly on the motherboard 
    Front panel ports have longer wires and more EMI. Use rear motherboard ports.
  2. 85% success Use a powered USB hub for adequate power delivery
  3. 82% success Check dmesg for specific error code 
    dmesg | grep usb  # -71=EPROTO, -32=EPIPE, -110=ETIMEDOUT

Dead Ends

Common approaches that don't work:

  1. Recompile kernel with different USB options 85% fail

    Protocol errors during enumeration are electrical issues, not kernel config

  2. Upgrade cable to USB 3.0 72% fail

    USB 3.0 cables may lack proper USB 2.0 data pair wiring. Use known-good USB 2.0 cable.

  3. Disable USB autosuspend globally 68% fail

    Autosuspend affects already-enumerated devices, not initial enumeration